Calculation Methodology

Every calculator on calcsrun.com is built on a published method and applies the same formula every time. This page explains which models we use, how we apply them, what they assume, and where their results should be treated with caution. If you notice something that looks wrong, please tell us through the Contact Us page.

What our calculators do, and what they do not

Our calculators turn the numbers you enter into estimates. They are mathematical models, not measurements and not medical tests. Two runners with the same recent race time can still respond differently to training, so treat every result as a starting point and adjust it with experience, how you feel on the day and, if you have one, the advice of your coach.

Units, constants and rounding

  • Distance constants: 1 mile = 1.609344 km (exact), 1 yard = 0.9144 m, 1 furlong = 201.168 m. Race distances use their official lengths: half marathon = 21.0975 km, marathon = 42.195 km.
  • Rounding: calculations are made at full precision and rounded only for display. Times are shown to the nearest second, paces to the nearest second per kilometre or mile, and other values to one or two decimals. Because of rounding, a pace and a finish time can differ by a second when you convert them back and forth.
  • Your data: the numbers you type into a calculator are processed in your browser. They are not sent to our servers (see our Privacy Policy).

Running Pace Calculator

Pace is time divided by distance, and speed is distance divided by time. Enter any two of distance, time and pace, and the third is calculated, together with the average speed in km/h and mph and the pace per kilometre and per mile. The calculation assumes a constant pace over the whole distance.

Race Time Predictor (Riegel formula)

The predictor uses the formula published by Pete Riegel:

T2 = T1 × (D2 ÷ D1)^1.06

where T1 is your time over distance D1 and T2 is the predicted time over distance D2. The exponent 1.06 reflects the fact that most runners slow down slightly as the distance grows.

Example: a 10K in 50:00 predicts a half marathon of about 1:50:19.

The prediction is the time you could run if you were trained for the longer distance and the conditions were similar. It works best between 5K and the marathon, and it tends to be optimistic when your training does not support the target distance (for example, a marathon predicted from a 5K by a runner with low weekly mileage). It is less reliable for ultramarathons.

Split Calculator

An even split means a constant pace from start to finish. A negative split means the second half is faster than the first, and a positive split means it is slower. You choose how much (1 to 5 per cent), and the calculator applies the change gradually, so the pace moves smoothly through the race instead of jumping at the halfway point. The splits are built so that they always add up exactly to the finish time you entered.

If the distance is not a multiple of the split length, the last split is shorter. For example, a marathon in 5 km splits ends with a 2.195 km split. The model assumes a flat course and an even effort; hills, wind and aid stations are not included.

VDOT Running Calculator (Daniels’ formulas)

VDOT is a performance score developed by Jack Daniels and Jimmy Gilbert. It converts a race result into an equivalent “oxygen power” value using two equations:

  • The oxygen cost of running at speed v (in metres per minute): VO2 = −4.60 + 0.182258 × v + 0.000104 × v²
  • The fraction of maximum oxygen uptake a runner can sustain for a race lasting t minutes: 0.8 + 0.1894393 × e^(−0.012778 × t) + 0.2989558 × e^(−0.1932605 × t)

VDOT is the oxygen cost of your race pace divided by that fraction. The same equations then work in reverse to give equivalent times for other distances and your training paces. Each training pace is the running speed that corresponds to a share of VO2max:

  • Easy (E): 59–74 % of VO2max
  • Marathon (M): 75–84 %
  • Threshold (T): 83–88 %
  • Interval (I): 95–100 %
  • Repetition (R): 105–110 % of the speed at VO2max

We also show a Recovery (Z1) zone at 50–59 % of VO2max, below the Easy zone. This zone is our own addition and is not part of Daniels’ system. If you enter your maximum heart rate, we show approximate heart-rate ranges for each zone as a share of that maximum; these are rough guides only.

Example: a 5K in 25:00 gives a VDOT of about 38.3, with equivalent results of about 51:53 for 10K, 1:55:04 for the half marathon and 3:57:55 for the marathon.

VDOT is not a laboratory VO2max test. It is a performance score that works best with a recent, all-out race on a flat course in good conditions.

Lactate Threshold Calculator

Lactate threshold pace is the fastest pace you can hold for roughly an hour. The calculator estimates it from your 5K time with a widely used guideline popularised by Pete Pfitzinger: threshold pace is about 20–30 seconds per mile slower than your 5K race pace (roughly 12–19 seconds per kilometre). The result is shown as a range.

Example: a 5K in 25:00 gives a threshold range of about 5:12–5:19 per kilometre (8:23–8:33 per mile).

This is a rule of thumb. A laboratory test or a properly executed field test will describe your own physiology better.

Heart Rate Zone Calculator (Karvonen method)

The zones are calculated with the Karvonen method, which uses your heart rate reserve (the difference between your maximum and resting heart rate):

Target heart rate = resting heart rate + (maximum heart rate − resting heart rate) × zone percentage

If you do not enter a maximum heart rate, it is estimated from your age: 208 − 0.7 × age (Tanaka) or, for women, 206 − 0.88 × age (Gulati). Individual maximum heart rates can differ from these estimates by 10 beats per minute or more, so a measured value gives better zones.

The six zones follow one another without gaps or overlaps. Their boundaries are 55, 65, 75, 80, 85, 90 and 100 per cent of heart rate reserve, and each zone starts 1 beat per minute above the end of the previous one. If you enter your threshold heart rate, the boundaries between zones 2 to 6 shift so that Zone 4 is centred on it.

Example: for a 35-year-old with a resting heart rate of 55 and a maximum of 185, the zones are 127–140, 141–153, 154–159, 160–166, 167–172 and 173–185 beats per minute.

The percentages are our own practical convention built on the Karvonen method. Other coaches, apps and watches use different boundaries. Heart rate is also affected by heat, altitude, sleep, caffeine, illness and medication.

Weekly Mileage Calculator

Week 1 is your current weekly volume. Each following build week adds the weekly increase you choose. A rest week lowers the volume by the percentage you choose, compared with the last build week, and the week after a rest week continues from where the last build week ended. The long run is a chosen share of the weekly volume, and the remaining distance is divided evenly between your other running days.

The 10 per cent weekly increase is a widely used rule of thumb, not a proven injury-safe limit, and the calculator warns you when you go above it. The plan does not take into account your injury history, terrain, intensity or life stress.

Running Fueling Calculator

The total carbohydrate need is your target intake per hour multiplied by the race time in hours. The number of gels is the total divided by the carbohydrate content of one gel, rounded to a whole number, and the actual intake per hour is recalculated from that number. The first gel is taken at the minute you choose, the last one at the number of minutes before the finish you choose, and the gels in between are spread evenly. Distances shown next to each gel assume a constant pace.

Most runners aim for 30–60 g of carbohydrate per hour, and intakes of up to 90 g per hour are used by athletes with a trained gut (see, for example, Jeukendrup, 2014). The calculator gives a schedule, not a nutrition prescription: practise your plan in training and never try a new product or amount on race day.

Distance and Pace Converters

The converters use the exact constants listed above. Speed in km/h equals 60 divided by the pace in minutes per kilometre, and speed in mph equals 60 divided by the pace in minutes per mile. Pace per mile equals pace per kilometre multiplied by 1.609344.

Assumptions and limits

  • Results are most accurate for flat road or track running in mild weather, with no strong wind.
  • Predictions and training paces are based on a recent, maximal effort. An easy or interrupted run will give results that are too slow.
  • Heat, humidity, altitude, hills, trails, illness, fatigue and your training history can all change what you can actually run.
  • Formulas describe the average runner. Your own physiology may be above or below the average.
  • Very short efforts and ultra-distance races are outside the range in which the underlying models were designed and tested.

Sources and references

  • Daniels, J. Daniels’ Running Formula. Human Kinetics.
  • Daniels, J., Gilbert, J. (1979). Oxygen Power: Performance Tables for Distance Runners.
  • Riegel, P. S. (1981). Athletic records and human endurance. American Scientist, 69(3), 285–290.
  • Karvonen, M. J., Kentala, E., Mustala, O. (1957). The effects of training on heart rate: a longitudinal study. Annales Medicinae Experimentalis et Biologiae Fenniae, 35(3), 307–315.
  • Tanaka, H., Monahan, K. D., Seals, D. R. (2001). Age-predicted maximal heart rate revisited. Journal of the American College of Cardiology, 37(1), 153–156.
  • Gulati, M. et al. (2010). Heart rate response to exercise stress testing in asymptomatic women. Circulation, 122(2), 130–137.
  • Pfitzinger, P., Douglas, S. Advanced Marathoning. Human Kinetics.
  • Jeukendrup, A. (2014). A step towards personalized sports nutrition: carbohydrate intake during exercise. Sports Medicine, 44(Suppl 1), S25–S33.

Disclaimer

calcsrun.com provides running calculators and training information for general informational purposes only. Results are estimates and should not be considered medical advice or a substitute for guidance from a qualified running coach, sports scientist or exercise physiologist. If you have a medical condition, or are unsure whether a training load is right for you, talk to a doctor before you change your training. Use the tools at your own discretion.